Linkage Remove Service Guideline

Linkage Remove

Free the linkage components from the swingarm and frame. Inspect the swingarm and frame on damage and excessive wear. Check the pivot bolts for damage and excessive wear. Replace any worn or damaged components as necessary.

8. Press the bearings out from the relay arm. Make sure that from opposite side bearing have enough free space to exit.

9. After bearings have been removed – clean the relay arm from old grease, grime and rust.

Connecting Link

Remember bearing location and depth before their removing – to help with future installation.

5. To get the bearing from the connecting link – use the internal bearing puller.

6. After bearings have been removed – clean the connecting link from old grease, grime and rust.

For Linkage Install

Click Here