Swing Arm Removal Service Guideline

Swingarm Remove

To make the job easier and more comfortable – clean swingarm and adjacent parts before start.

9. Press the inner and outer bearings out of the swingarm. Allow room for the bearings to exit the far side of the swingarm.

Note the location and depth when removing the bearings to help with installation.

10. Clean away all old grease, grime, and rust from the bearing bores. Inspect the bearing bores for wear and damage. Make sure the bores are free of damage or burrs that may cause the new bearings to hang during installation.

For Swing Arm Installation

Click Here