1. Remove the both wheel collars by gently praising them out.
2. After collars have been removed – inspect them. Check outer surfaces and if they are worn – replace collars on the new ones.
6.Check for the snap ring or bearing retainer and remove it using the Circlip Pliers.
7. After snap ring/bearing retainer have been removed – you can start to remove the bearing. To do this, we will need a bearing puller. Put puller inside the hub and pull out the bearing.
8. If bearing puller is not available, some long punch with a hammer can be used. Insert the punch into the wheel hub and catch the edge of bearing. Hit the punch using a hummer and work around circumference of bearing.